Bx62r Three Point Chipper Shredder , 40 - 100HP Pto Driven Shredder

Send your message to this supplier

*From:

Your email address is incorrect!

To:Weifang Fred Machinery Co., Ltd.

*Subject:

Your subject must be between 10-255 characters!

*Message:

Your message must be between 20-3,000 characters!

Yes!I would like your verified suppliers matching service!

Buy cheap Bx62r Three Point Chipper Shredder , 40 - 100HP Pto Driven Shredder from wholesalers

Bx62r Three Point Chipper Shredder , 40 - 100HP Pto Driven Shredder

Ask Latest Price

Brand Name:Fred

Model Number:BX62R

Certification:CE

Price:Negociated

Payment Terms:T/T, Western Union, MoneyGram, L/C, D/A, D/P

Supply Ability:300 Units Per Month

Delivery Time:30 Working Days After Your Payment

Company Data

Weifang Fred Machinery Co., Ltd.

Active Member

Contact Person Paul

Business Type: 86-536-8912280

Business Type: Manufacturer Exporter Seller

Officials: Junbukou Industrial Estate, Weicheng District, Weifang, China

Quality: Quality Certifitation Available

Product Details Company Profile

Product Details

Pto Driven Wood Chipper With Six Inches Chipping Capacity For 260mm Length Knife

The BX62R is a PTO wood chipper of top quality engineering. Through its hydraulic feed is working with this machine a delight. Subsequent pushing, pressing, etc., there is not in this model; do that the two large feed rollers alone. The speed of the feed rollers can be varied continuously. This is important in order to align the feed speed on the diameter of the Schredderguts. Smaller diameters can be recovered faster than larger diameter. If the collection nevertheless once block may be set to the reverse mode on the large bracket on the hopper of the catchment. In addition, the feeder can also be disabled on this clip.

The BX62R, which has a bilateral suspension of the feed rollers, and a reinforced feed hopper.

The wood chipper is supplied complete with PTO. In the PTO is on one side of a shear pin fitted, which serves as a predetermined breaking point for safety reasons in blocking or overloading. So you can easily use larger tractors with more than 100 hp. You should have at least a motor power of 30 hp. The PTO speed must be 540 - 1000 rpm / min. amount.

The hopper has a top opening of 63.5 x 63.5 cm; at the bottom of the opening has a dimension of 16.5 x 30.5 cm. Maximum, a diameter of 16.5 cm are shredded. Many competitors give the maximum Schreddergutdurchmesser equal to the dimensions of the lower filler opening to . Softer woods can be shredded with diameters of up to 25 cm, if necessary; and such diameter are processed into firewood in the rule and not chopped.

The processing of the BX62R is very solid; the material thickness of the sheets employed are in the load bearing portion 10 and 12 mm, in the hoppers, and to non-load-bearing elements 4 and 6 mm.

For transport, the hopper can be easily folded up and secured with a cotter pin. To facilitate the folding features of the Chopper 2 shock absorbers.

The machine has a very easy to maintain; so you can open with the removal of just one screw the complete flywheel cover and has access to the 4 cutting blades. These cutters have blades on both sides, so they can be easily rotated when needed. The flywheel has a weight of 95 kg and has put on wings, which produce the very strong train by which ultimately the shredded material is blown out through the discharge hopper. By this very strong draft clogging of the shredder plant is almost impossible.

The discharge hopper has a height of 220 cm (plus. Raising the lower arm) and can be rotated 360 degrees. On request we can provide in addition a discharge hopper extension of 50 cm. Thus the shredded can easily fill on tractor trailers or directly in big bags. The ejection angle can also be changed. The BX62R flings the shredded up to 10 meters! Color as your request.

The shredder is designed for 3-point hitch and can be used from Kat. I..

Company Profile

Weifang Fred Machinery Co., Ltd.

Weifang Fred Machinery Co., Ltd. was established in 2003, located in Junbukou Industrial Estate, Weifang, Shandong, China. The factory area covers more than 13000 square meters and we own more than 90 cutting, profiling, milling, turning, welding, drilling, polishing, powder painting and assembling processing equipment. A new numerically controlled production center (NCPC) was set up at the end of 2014. Quality of parts and machines details are guaranteed.
With its strong techniques power, complete set of machining equipment and experimental devices, advanced CAD R&D methods, the company has all complete production line. Fred Machinery, as a professional manufacturer, has already manufactured a full range of high quality implements matching to small and medium-sized tractors owners across the world. We export large quantity of implements, especially lots of units wood chippers and Front End Loaders each year together with Foton Tractors.
By now,Fred Machinery already has more than 6 serials and more than 20 models of various implements including Wood Chippers, Round Baler, Disc Mower, Foton Front End Loader etc.
Fred Machinery are committed to providing after sales service and supplying a full range of backup replacement parts. All Implements are CE and ISO9001 certified and approved.
Business Scope: Fred Machinery is specialized in developing, production and business operation of civil engineering machinery, modern farming equipment. Fred Machinery is also interested in being the sales agent of the famous foreign farm machinery in China.
Business tenet: FRED shall insist on serving the farm machinery user all over the world with modern science and technology.
Business concept: Quality creates value and service completes perfect.
Business guideline: Adopt advanced science and technology, Aim at top-grade quality, Insist on clients first and take faith and credit as the base of business operation.
Welcome all businessmen to come for discussing business and making friend with us, and we also deal with the business of production against sample or drawings.